Slotted spring pin DIN 1481 / ISO 8752, heavy duty, 2.5x6 mm, wall 0.50 mm, stainless steel A2

This heavy duty spring pin to DIN 1481 and ISO 8752 springs from 2.9 mm down to the hole size of 2.5 mm as it is driven in and then holds itself. It is 6 mm long and has 0.50 mm wall thickness at 1.8 mm inside diameter. It is supplied in stainless steel A2.

Benefits

• 0.4 mm of interference against the nominal size of 2.5 mm, the holding force is produced without a reamed hole
• wall thickness 0.50 mm to the heavy duty version of DIN 1481
• overall length 6 mm at 1.8 mm inside diameter before fitting
• outside diameter 2.9 mm before fitting, slotted and therefore springy
• stainless steel A2 for damp surroundings and frequent cleaning
• dimensions to DIN 1481 and ISO 8752, hence interchangeable across manufacturers

Applications

It finds its place in jig making, where hole patterns are to be pinned without reaming.

Standards and conformity

The pin is made to DIN 1481 and ISO 8752 in the heavy duty version. The stated material is stainless steel A2.