Slotted spring pin DIN 1481 / ISO 8752, heavy duty, 2.0x26 mm, wall 0.40 mm, stainless steel A2

With 0.3 mm of interference against the nominal size of 2.0 mm, this pin to DIN 1481 and ISO 8752 sits firmly in the hole without a fit. The heavy duty version brings 0.40 mm of wall thickness, the overall length is 26 mm. The material is stainless steel A2.

Benefits

• 0.3 mm of interference against the nominal size of 2.0 mm, the holding force is produced without a reamed hole
• wall thickness 0.40 mm to the heavy duty version of DIN 1481
• overall length 26 mm at 1.5 mm inside diameter before fitting
• outside diameter 2.3 mm before fitting, slotted and therefore springy
• stainless steel A2 for damp surroundings and frequent cleaning
• dimensions to DIN 1481 and ISO 8752, hence interchangeable across manufacturers

Applications

It is used as a pivot and hinge pin in levers, flaps and catches.

Standards and conformity

The pin is made to DIN 1481 and ISO 8752 in the heavy duty version. The stated material is stainless steel A2.