Slotted spring pin DIN 1481 / ISO 8752, heavy duty, 1.5x20 mm, wall 0.30 mm, plain steel

For removable joints without a reamed hole, this pin to DIN 1481 and ISO 8752 carries the nominal size 1.5 mm over 20 mm of length. Inside it measures 1.1 mm, the wall is 0.30 mm thick. The data sheet names plain steel (black) as the material.

Benefits

• 0.3 mm of interference against the nominal size of 1.5 mm, the holding force is produced without a reamed hole
• wall thickness 0.30 mm to the heavy duty version of DIN 1481
• overall length 20 mm at 1.1 mm inside diameter before fitting
• outside diameter 1.8 mm before fitting, slotted and therefore springy
• plain spring steel, uncoated and therefore dimensionally true in the hole
• dimensions to DIN 1481 and ISO 8752, hence interchangeable across manufacturers

Applications

Its place is in mechanical engineering as a driving pin and as a connection between shaft and hub.

Standards and conformity

The pin is made to DIN 1481 and ISO 8752 in the heavy duty version. The stated material is plain steel (black).