Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pressure sensor 0 to 10 bar with IO-Link QS-4 SPAF-P10R-Q4-L-PNLK-VB-M8 - Festo 8181222
The pressure sensor SPAF-P10R-Q4-L-PNLK-VB-M8 is designed for relative pressure from 0 to 10 bar and switches via a switching output, PNP/NPN switchable. Besides the analogue output 0 - 10 V, 1 - 5 V, IO-Link is available as a digital interface. Pneumatic connection QS-4, electrical connection M8x1 plug, 4-pin.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Where relative pressure has to be monitored within 0 to 10 bar, the SPAF-P10R-Q4-L-PNLK-VB-M8 provides switching signal and measured value from a single device.
Benefits
- Measuring range 0 to 10 bar, overload pressure 15 bar
- Accuracy ±1.5 %FS, repetition accuracy ±0.3 %FS
- Switching output PNP/NPN switchable, switching function window comparator, threshold value comparator, threshold value with variable hysteresis
- Analogue output 0 - 10 V, 1 - 5 V and IO-Link
- Blue illuminated LCD, setting via IO-Link, teach-in, via display and buttons
- Degree of protection IP65, corrosion resistance class 2 (moderate corrosion stress)
Applications
Operating medium of the SPAF-P10R-Q4-L-PNLK-VB-M8: compressed air to ISO 8573-1:2010 [7:4:4], inert gas, mounting with accessories. Up to 10 bar it suits checking supply and working pressure, for example at service units and drives. Supply voltage 15 to 30 V DC.
Technical data
| Type | SPAF-P10R-Q4-L-PNLK-VB-M8 |
|---|---|
| Festo part number | 8181222 |
| Approval | RCM |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 bar |
| End value for pressure measuring range | 10 bar |
| Overload pressure | 15 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4], Inert gas |
| Note on operating and pilot medium | Ester oil below 0.1mg/m³, according to ISO 8573-1:2010 [-:-:2], Lubricated operation possible |
| Media temperature | 0 to 50 °C |
| Ambient temperature | 0 to 50 °C |
| Accuracy in ± % FS | 1.5 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | PNP/NPN, switchable |
| Switching function | Window comparator, Threshold value comparator, Threshold value with variable hysteresis |
| Switching element function | NC or NO, switchable |
| Switch-on time | 3 ms |
| Switch-off time | 3 ms |
| Max. output current | 100 mA |
| Voltage drop | 1.6 V |
| Analogue output | 0 - 10 V, 1 - 5 V |
| Output characteristic curve start value | 0 V |
| Output characteristic curve end value | 10 V |
| Accuracy analogue output in ± %FS | 1.5 %FS |
| Linearity error in ± %FS | 0.3 %FS |
| Rise time | 6 ms |
| Min. load resistance voltage output | 20 kOhm |
| Display range start value | 0 %FS |
| Display range end value | 100 %FS |
| Short circuit current rating | Yes |
| Overload protection | Available |
| Protocol | IO-Link |
| IO-Link, revision ID | V1.1 |
| IO-Link, device profile | Firmware update, Function locator, Function Product URI, Function quantity detection, Smart Sensor - SSP 4.1.1 |
| IO-Link, transmission rate | COM3 |
| IO-Link, SIO mode support | Yes |
| IO-Link, port type | Class A |
| IO-Link, process data length output | 0 bit |
| IO-Link, process data length input | 32 bit |
| IO-Link, process data content IN | Pressure measured value 16 bit MDC, Pressure monitoring 2 bit SSC |
| IO-Link, service data content IN | Temperature 16 bit |
| IO-Link, minimum cycle time | 0.9 ms |
| IO-Link, data storage required | 500 byte |
| Operational voltage range DC | 15 to 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, type of mounting | Snap-locking, Screw-type lock, Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock, Compatible with rotatable screw-type lock |
| Material connector housing | Reinforced PA |
| Type of mounting | With accessories |
| Mounting position | Any |
| Pneumatic connection | QS-4 |
| Product weight | 30 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Stainless steel, NBR, Reinforced PA |
| Display type | Backlit blue LCD |
| Ready status indication | Through backlighting |
| Setting options | IO-Link, Teach-in, Via display and buttons |
| Protection against tampering | IO-Link, PIN code |
| Setting range threshold value | 0 to 100 % |
| Setting range hysteresis | 0 to 90 % |
| Degree of protection | IP65 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 |
| Weight | 0.03 kg |
| Manufacturer | Festo |
| Hersteller-Nr | SPAF-P10R-Q4-L-PNLK-VB-M8 |
| EAN | 4052568650025 |
| Zolltarifnummer | 90262020 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Measuring range max. [bar] | 10 |
| Medientemperatur [°C] | 0 bis 50 |
| Protection rating | IP65 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.




