Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pressure sensor SPAF-P10R-G18M-L-PNLK-VB-M8 - Festo 8181228
Net
excl. VAT
€128.34
Item
FES-8181228
Manufacturer no.
SPAF-P10R-G18M-L-PNLK-VB-M8
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Approval | RCM |
|---|---|
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 bar |
| End value for pressure measuring range | 10 bar |
| Overload pressure | 15 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4], Inert gas |
| Note on operating and pilot medium | Ester oil < 0.1mg/m³, according to ISO 8573-1:2010 [-:-:2], Lubricated operation possible |
| Media temperature | 0 ... 50 °C |
| Ambient temperature | 0 ... 50 °C |
| Accuracy in ± % FS | 1.5 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | PNP/NPN, switchable |
| Switching function | Window comparator, Threshold value comparator, Threshold value with variable hysteresis |
| Switching element function | NC or NO, switchable |
| Switch-on time | 3 ms |
| Switch-off time | 3 ms |
| Max. output current | 100 mA |
| Voltage drop | 1.6 V |
| Analogue output | 0 - 10 V, 1 - 5 V |
| Output characteristic curve start value | 0 V |
| Output characteristic curve end value | 10 V |
| Accuracy analogue output in ± %FS | 1.5 %FS |
| Linearity error in ± %FS | 0.3 %FS |
| Rise time | 6 ms |
| Min. load resistance voltage output | 20 kOhm |
| Display range start value | 0 %FS |
| Display range end value | 100 %FS |
| Short circuit current rating | Yes |
| Overload protection | Available |
| Protocol | IO-Link® |
| IO-Link, revision ID | V1.1 |
| IO-Link, device profile | Firmware update, Function locator, Function Product URI, Function quantity detection, Smart Sensor - SSP 4.1.1 |
| IO-Link, transmission rate | COM3 |
| IO-Link, SIO-Mode support | Yes |
| IO-Link, port type | Class A |
| IO-Link, process data length output | 0 bit |
| IO-Link, process data length input | 32 bit |
| IO-Link, Process data content IN | Pressure measured value 16 bit MDC, Pressure monitoring 2 bit SSC |
| IO-Link, Service data IN | Temperature 16 bit |
| IO-Link, minimum cycle time | 0.9 ms |
| IO-Link, Data storage required | 500 byte |
| Operational voltage range DC | 15 ... 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, type of mounting | Snap-locking, Screw-type lock, Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock, Compatible with rotatable screw-type lock |
| Electrical connection 1, connection pattern | 00991171 |
| Material connector housing | Reinforced PA |
| Type of mounting | Either:, With male thread, With accessories |
| Mounting position | Any |
| Pneumatic connection | Male thread G1/8 |
| Product weight | 45 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Stainless steel, NBR, Reinforced PA |
| Display type | Backlit blue LCD |
| Displayable units | MPa, bar, kPa, psi |
| Ready status indication | Through backlighting |
| Setting options | IO-Link®, Teach-in, Via display and buttons |
| Protection against tampering | IO-Link®, PIN code |
| Setting range threshold value | 0 ... 100 % |
| Setting range hysteresis | 0 ... 90 % |
| Degree of protection | IP65 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 |
| Weight | 0.05 kg |
| Manufacturer | Festo |
| Hersteller-Nr | SPAF-P10R-G18M-L-PNLK-VB-M8 |
| EAN | 4052568650087 |
| Zolltarifnummer | 90262020 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
