Countersunk screw ISO 10642 / DIN 7991, M 8x45, head 16 mm, hex socket 5 mm, stainless steel A2

For flush joints this version to ISO 10642 and DIN 7991 carries thread M 8 over 45 mm of length. The countersunk head is 16 mm in diameter and 5.0 mm high, and it is turned through the hexagon socket with 5 mm width across flats. The material is stainless steel A2.

Benefits

• head diameter 16 mm and head height 5.0 mm to ISO 10642, matching the standard counterbore
• hexagon socket with 5 mm width across flats for a high tightening torque in a tight space
• thread M 8 over 45 mm of shank length
• thread up to approximately the head, the full depth of engagement can be used
• stainless steel A2 withstands moisture and cleaning agents
• a flush finish, at 5.0 mm head height no edge is left standing above the joint

Applications

It is fitted in steel and vessel construction, on clamping strips and brackets with a countersunk hole.

Standards and conformity

The screw is made to ISO 10642 and DIN 7991. The material is stated as stainless steel A2 to ISO 3506.