Countersunk screw ISO 10642 / DIN 7991, M 6x45, head 12 mm, hex socket 4 mm, stainless steel A2

The 90 degree countersunk head of this screw to ISO 10642 and DIN 7991 sinks 3.7 mm into the counterbore and finishes flush. It is made with thread M 6 and 45 mm length, the hexagon socket measures 4 mm, the head 12 mm. The data sheet names stainless steel A2 as the material.

Benefits

• head diameter 12 mm and head height 3.7 mm to ISO 10642, matching the standard counterbore
• hexagon socket with 4 mm width across flats for a high tightening torque in a tight space
• thread M 6 over 45 mm of shank length
• thread up to approximately the head, the full depth of engagement can be used
• stainless steel A2 withstands moisture and cleaning agents
• a flush finish, at 3.7 mm head height no edge is left standing above the joint

Applications

Its place is in furniture and shopfitting, on fittings and hinges that have to sit flush.

Standards and conformity

The screw is made to ISO 10642 and DIN 7991. The material is stated as stainless steel A2 to ISO 3506.