Countersunk self-tapping screw DIN 7982 C/ISO 7050, 6.3 x 50 mm, stainless steel A2

This countersunk self-tapping screw to DIN 7982 C cuts its own thread in the sheet and pulls the countersunk head flush into the recess. The data state a nominal diameter of 6.3 mm. The stated figures are a nominal diameter of 6.3 mm, a length of 50 mm, a head diameter of 12.4 mm and a head height of at most 3.8 mm. This version is supplied with cross recess PH3.

Benefits

• A nominal diameter of 6.3 mm to DIN 7982 C cuts its thread in the sheet without pre-tapping.
• The countersunk head of 12.4 mm diameter disappears completely into the recess.
• A head height of at most 3.8 mm to DIN 7982 C keeps the surface clear.
• Cross recess PH3 guides the screwdriver when starting.
• A length of 50 mm sets the depth of engagement in the sheet stack.
• Made of stainless steel A2.

Applications

When fitting panelling the PH3 cross recess lets the screw be started safely even overhead.

Standards and conformity

Head diameter 12.4 mm and head height 3.8 mm follow DIN 7982 C and therefore ISO 7050.