Hexagon head screw DIN 933 ISO 4017, full thread, M 5x12, AF 8, stainless steel A2

Hexagon head screws M 5x12 join flanges, profiles and housings wherever the wrench has to reach the head from outside. This variant is made of stainless steel A2 and has a width across flats of 8 mm to DIN 933.

Benefits

• Thread almost up to the head to DIN 933 and ISO 4017, load bearing thread over the full length of 12 mm
• Hexagon head with 8 mm across the flats for open end, ring and socket wrenches
• Stainless steel A2 stays corrosion resistant without any additional coating
• Corrosion resistant material through the full cross section, no layer that can flake off
• Head height of 3.5 mm limits the build height of the joint
• Metric coarse thread M 5, matching nuts and tapped holes are standardised and widely available

Applications

Process engineering and vessel construction, outdoor mounting, damp production rooms, conveying equipment with frequent wet cleaning.

Standards and conformity

Dimensions and thread version follow DIN 933 and ISO 4017. The width across flats is 8 mm to DIN and 8 mm to ISO. The material is stainless steel A2.