Hexagon head screw DIN 933 ISO 4017, full thread, M 30x110, AF 46, stainless steel A4

Hexagon head screws M 30x110 join flanges, profiles and housings wherever the wrench has to reach the head from outside. This variant is made of stainless steel A4 and has a width across flats of 46 mm to DIN 933.

Benefits

• Thread almost up to the head to DIN 933 and ISO 4017, load bearing thread over the full length of 110 mm
• Hexagon head with 46 mm across the flats for open end, ring and socket wrenches
• Stainless steel A4 withstands chloride bearing media better than A2
• Corrosion resistant material through the full cross section, no layer that can flake off
• Head height of 18.7 mm limits the build height of the joint
• Metric coarse thread M 30, matching nuts and tapped holes are standardised and widely available

Applications

Process engineering and vessel construction, outdoor mounting, damp production rooms, conveying equipment with frequent wet cleaning.

Standards and conformity

Dimensions and thread version follow DIN 933 and ISO 4017. The width across flats is 46 mm to DIN and 46 mm to ISO. The material is stainless steel A4.