Hexagon head screw DIN 933 ISO 4017, full thread, M 16x80, AF 24, stainless steel A2

The hexagon head screw M 16x80 in stainless steel A2 transfers load through a thread that reaches almost up to the head according to DIN 933. The full engagement length therefore carries load even when the clamping length is only a few millimetres. Across the flats the head measures 24 mm.

Benefits

• Thread almost up to the head to DIN 933 and ISO 4017, load bearing thread over the full length of 80 mm
• Hexagon head with 24 mm across the flats for open end, ring and socket wrenches
• Head height of 10.0 mm limits the build height of the joint
• Stainless steel A2 stays corrosion resistant without any additional coating
• Corrosion resistant material through the full cross section, no layer that can flake off

Applications

Plant construction exposed to moisture or cleaning agents, conveying equipment, interior fit out, outdoor assemblies, water and waste water technology.

Standards and conformity

Dimensions and thread version follow DIN 933 and ISO 4017. The width across flats is 24 mm to DIN and 24 mm to ISO. The material is stainless steel A2.