Hexagon head bolt DIN 931 / ISO 4014, M 20x160, hexagon 30 mm, shank 108 mm, stainless steel A4

Outdoors and in wet areas large bolts must still come loose after years. This hexagon head bolt M 20x160 to DIN 931 made of stainless steel A4 stays resistant without a coating. The plain shank measures 108 mm and the thread 52 mm. The hexagon head has 30 mm across flats and a height of 12.5 mm.

Advantages

• Thread length of 52 mm to DIN 931, sufficient for a nut and a washer in size M 20.
• Plain shank of 108 mm within 160 mm of total length, which places the shear plane in the full shank cross section instead of the thread.
• Head height of 12.5 mm keeps the overall height of the joint low.
• Hexagon head with 30 mm across flats, so the tightening torque can be applied with an ordinary open-ended or ring spanner.
• Stainless steel A4 also withstands chloride-bearing water, which suits outdoor positions and areas close to cleaning agents.

Applications

Conveying and plant equipment where joints in size M 20 are undone regularly. Bolting of profile frames and cross beams over a clamping range up to 160 mm. Mounting of guide rails and stops with a fitted hole for the shank. Joints where the width across flats of 30 mm has to match the available tools.

Standards and conformity

The bolt is dimensioned to DIN 931 and ISO 4014. The width across flats is 30 mm to DIN 931 and 30 mm to ISO 4014. The material is stainless steel A4.