Hexagon head bolt DIN 931 / ISO 4014, M 20x110, hexagon 30 mm, shank 64 mm, steel 10.9, plain

More highly preloaded joints need a defined shank cross section. This hexagon head bolt M 20x110 to DIN 931 in steel of property class 10.9, plain and black offers 64 mm of plain shank and limits the thread to 46 mm. Tightening takes place on the hexagon with 30 mm across flats at a head height of 12.5 mm. The surface is plain and black.

Advantages

• Dimensions to DIN 931 and ISO 4014, so replacement and repeat orders are unambiguous through the designation M 20x110.
• Plain shank of 64 mm within 110 mm of total length, which places the shear plane in the full shank cross section instead of the thread.
• Property class 10.9, plain and black, suited to more highly preloaded joints in protected indoor positions.
• Hexagon head with 30 mm across flats, so the tightening torque can be applied with an ordinary open-ended or ring spanner.
• Head height of 12.5 mm keeps the overall height of the joint low.

Applications

Steelwork and frame structures with through holes for M 20. Mounting of motors, gearboxes and pumps where the plain shank of 64 mm takes the shear load. Assembly of housing covers and panels with a clamping length up to 64 mm. Replacement of damaged standard bolts in size M 20x110.

Standards and conformity

The bolt is dimensioned to DIN 931 and ISO 4014. The width across flats is 30 mm to DIN 931 and 30 mm to ISO 4014. The material is steel of property class 10.9, plain and black.