Hexagon head bolt DIN 931 / ISO 4014, M 16x160, hexagon 24 mm, shank 116 mm, stainless steel A4

Outdoors and in wet areas large bolts must still come loose after years. This hexagon head bolt M 16x160 to DIN 931 made of stainless steel A4 stays resistant without a coating. The plain shank measures 116 mm and the thread 44 mm. The hexagon head has 24 mm across flats and a height of 10.0 mm.

Advantages

• Thread length of 44 mm to DIN 931, sufficient for a nut and a washer in size M 16.
• Plain shank of 116 mm within 160 mm of total length, which places the shear plane in the full shank cross section instead of the thread.
• Head height of 10.0 mm keeps the overall height of the joint low.
• Hexagon head with 24 mm across flats, so the tightening torque can be applied with an ordinary open-ended or ring spanner.
• Stainless steel A4 also withstands chloride-bearing water, which suits outdoor positions and areas close to cleaning agents.

Applications

Steelwork and frame structures with through holes for M 16. Mounting of motors, gearboxes and pumps where the plain shank of 116 mm takes the shear load. Assembly of housing covers and panels with a clamping length up to 116 mm. Replacement of damaged standard bolts in size M 16x160.

Standards and conformity

The bolt is dimensioned to DIN 931 and ISO 4014. The width across flats is 24 mm to DIN 931 and 24 mm to ISO 4014. The material is stainless steel A4.