Hexagon head bolt DIN 931 / ISO 4014, M 10x90, hexagon 17 mm, shank 64 mm, stainless steel A2

Plants that are washed down regularly call for resistant fasteners. This hexagon head bolt M 10x90 to DIN 931 made of stainless steel A2 meets that requirement without any coating. Of the 90 mm total length, 26 mm are threaded and 64 mm stay plain. The hexagon with 17 mm across flats can still be engaged after a long service life.

Advantages

• Hexagon head with 17 mm across flats, so the tightening torque can be applied with an ordinary open-ended or ring spanner.
• Plain shank of 64 mm within 90 mm of total length, which places the shear plane in the full shank cross section instead of the thread.
• Thread length of 26 mm to DIN 931, sufficient for a nut and a washer in size M 10.
• Stainless steel A2 stays bright under moisture and wash water, so an additional coating is not needed.
• Head height of 6.4 mm keeps the overall height of the joint low.

Technical data

Applications

Steelwork and frame structures with through holes for M 10. Mounting of motors, gearboxes and pumps where the plain shank of 64 mm takes the shear load. Assembly of housing covers and panels with a clamping length up to 64 mm. Replacement of damaged standard bolts in size M 10x90.

Standards and conformity

The bolt is dimensioned to DIN 931 and ISO 4014. The width across flats is 17 mm to DIN 931 and 16 mm to ISO 4014. The material is stainless steel A2.