Hexagon head bolt DIN 931 / ISO 4014, M 10x100, hexagon 17 mm, shank 74 mm, stainless steel A4

Plants that are washed down regularly call for resistant fasteners. This hexagon head bolt M 10x100 to DIN 931 made of stainless steel A4 meets that requirement without any coating. Of the 100 mm total length, 26 mm are threaded and 74 mm stay plain. The hexagon with 17 mm across flats can still be engaged after a long service life.

Advantages

• Hexagon head with 17 mm across flats, so the tightening torque can be applied with an ordinary open-ended or ring spanner.
• Plain shank of 74 mm within 100 mm of total length, which places the shear plane in the full shank cross section instead of the thread.
• Thread length of 26 mm to DIN 931, sufficient for a nut and a washer in size M 10.
• Stainless steel A4 also withstands chloride-bearing water, which suits outdoor positions and areas close to cleaning agents.
• Head height of 6.4 mm keeps the overall height of the joint low.

Applications

Steelwork and frame structures with through holes for M 10. Mounting of motors, gearboxes and pumps where the plain shank of 74 mm takes the shear load. Assembly of housing covers and panels with a clamping length up to 74 mm. Replacement of damaged standard bolts in size M 10x100.

Standards and conformity

The bolt is dimensioned to DIN 931 and ISO 4014. The width across flats is 17 mm to DIN 931 and 16 mm to ISO 4014. The material is stainless steel A4.