Angle seat valve, pneumatic, G 1/2", brass, normally closed, closing against flow, up to +200 °C

Once installed, the angle seat valve shuts off liquids, steam and gases in an inclined seat with a low pressure drop. This version comes with connection G 1/2" and installation length 66 mm. It is complemented by a medium temperature of -20 to +200 °C. Also stated are the normal position closed and the version closing against the direction of flow.

Benefits

• Working pressure range 0 - 16 bar at connection G 1/2".
• Medium temperature -20 to +200 °C at an ambient temperature of -10 to +60 °C.
• Installation length 66 mm, valve body in brass.
• Control pressure 4 to 10 bar, 6 bar as the optimum, control port G 1/8 inch.
• Normal position closed in the closing against the direction of flow version.

Applications

In steam and hot water lines the valve switches at connection G 1/2" up to -20 to +200 °C.

Standards and conformity

The control pressure is 4 to 10 bar, 6 bar as the optimum, and the control port is G 1/8 inch. The seat seal is made of PTFE.