Angle seat valve, pneumatic, G 1-1/4", 1.4408, normally closed, closing against flow

Once installed, the angle seat valve shuts off liquids, steam and gases in an inclined seat with a low pressure drop. The article is listed with a working pressure range of 0 - 7 bar. This version is listed with connection G 1-1/4" and installation length 110 mm. Material stainless steel 1.4408 is listed for this version. Also stated are the normal position closed and the version closing against the direction of flow.

Benefits

• Working pressure range 0 - 7 bar at connection G 1-1/4".
• Medium temperature -40 to +200 °C at an ambient temperature of -10 to +60 °C.
• Installation length 110 mm, valve body in stainless steel 1.4408.
• Control pressure 4 to 10 bar, 6 bar as the optimum, control port G 1/8 inch.
• Normal position closed in the closing against the direction of flow version.

Applications

In process engineering the valve in stainless steel 1.4408 works over a pressure range of 0 - 7 bar.

Standards and conformity

The control pressure is 4 to 10 bar, 6 bar as the optimum, and the control port is G 1/8 inch. The seat seal is made of PTFE.