Angle seat valve, pneumatic, G 1-1/2", 1.4408, normally closed, closing against flow

In use, the angle seat valve shuts off liquids, steam and gases in an inclined seat with a low pressure drop. It is produced from stainless steel 1.4408. The data give connection G 1-1/2" and installation length 120 mm. In addition the data give the normal position closed and the version closing against the direction of flow.

Benefits

• Working pressure range 0 - 8 bar at connection G 1-1/2".
• Medium temperature -40 to +200 °C at an ambient temperature of -10 to +60 °C.
• Installation length 120 mm, valve body in stainless steel 1.4408.
• Control pressure 4 to 10 bar, 6 bar as the optimum, control port G 1/8 inch.
• Normal position closed in the closing against the direction of flow version.

Applications

In process engineering the valve in stainless steel 1.4408 works over a pressure range of 0 - 8 bar.

Standards and conformity

The data give a control pressure of 4 to 10 bar and a control port G 1/8 inch. The closing against the direction of flow version sets the direction of flow.