Bulkhead nipple, with 60° cone, thread G 1/2", Emax 29 mm, PN 350 bar, zinc plated steel

The bulkhead nipple leads a line through a wall or plate and is braced from both sides. Zinc plated steel determines the load capacity and the corrosion behaviour. The joint is created via the thread G 1/2". The nominal pressure is stated as 350 bar.

Benefits

• The feed through absorbs tensile forces and relieves the line at 1 defined point.
• Steel takes the tightening torque on the G 1/2" thread without permanent deformation.
• The nominal pressure of 350 bar defines the load limit of the joint.
• The thread G 1/2" fits the existing port without an adapter.
• At 29 mm the dimension Emax is defined in the data sheet and can be planned in advance.
• Bracing from 2 sides holds the connection in the wall without an additional bracket.

Applications

Wall feed throughs on cabinets, machine panels, vessels and housings. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.