Pipe clamp DIN 3015-1 light series, size 5, pipe 35 mm, polypropylene, weld-on plate

As a pipe clamp the article holds pipes and hoses on the machine frame with vibration damping. The data sheet gives a pipe outside diameter of 35 mm. This version is listed with 64 mm height and 30 mm width. Material polypropylene is listed for this version. Also stated are mounting by weld-on plate.

Benefits

• Size 5 of the light series to DIN 3015-1 for pipes of 35 mm outside diameter.
• Two-part clamp body in polypropylene measuring 64 mm in height and 30 mm in width.
• Dimension a3 of 70 mm sets the spacing at the mounting part.
• The clamp body absorbs pipe vibration and prevents chafing on the pipe of 35 mm outside diameter.
• Metal parts in bright or zinc-plated steel, screws in zinc-plated steel.

Technical data

Applications

On hydraulic power units and machine frames the size 5 clamp guides pipes of 35 mm outside diameter and keeps them clear of the sheet metal.

Standards and conformity

Size 5, height 64 mm and width 30 mm follow the light series of DIN 3015-1.