Pipe cap for pipe 88.9 mm, wall thickness 2.0 mm, stainless steel 1.4541, similar to DIN 28011

Once installed, the pipe cap closes the end of a pipe pressure-tight and is butt welded to the pipe. It is supplied with pipe outside diameter 88.9 mm and wall thickness 2.0 mm. It is produced from stainless steel 1.4541.

Benefits

• For pipe 88.9 mm outside diameter at a wall thickness of 2.0 mm.
• Domed shape to similar to DIN 28011, so the cap takes the internal pressure without extra stiffening.
• Material stainless steel 1.4541, so the cap can be welded to a pipe of the same grade.
• The wall thickness of 2.0 mm matches that of the pipe, so the weld stays even.
• Supplied as a formed part, so the pipe end does not have to be closed with sheet metal.

Technical data

Applications

Where an extension is planned for later, the branch is closed with the cap to similar to DIN 28011 and can be cut open again.

Standards and conformity

The 88.9 x 2.0 mm cap is made to similar to DIN 28011 and produced from stainless steel 1.4541.