Pipe cap for pipe 76.1 mm, wall thickness 5.0 mm, P265GH black steel, EN 10253 type B (DIN 2617)

Once installed, the pipe cap closes the end of a pipe pressure-tight and is butt welded to the pipe. This version is listed with pipe outside diameter 76.1 mm and wall thickness 5.0 mm. Decisive for the selection is a pipe outside diameter of 76.1 mm.

Benefits

• For pipe 76.1 mm outside diameter at a wall thickness of 5.0 mm.
• Domed shape to EN 10253 type B (DIN 2617), so the cap takes the internal pressure without extra stiffening.
• Material P265GH black steel, so the cap can be welded to a pipe of the same grade.
• The wall thickness of 5.0 mm matches that of the pipe, so the weld stays even.
• Supplied as a formed part, so the pipe end does not have to be closed with sheet metal.

Applications

At the end of a pipe run 76.1 mm the cap closes the line and holds the internal pressure.

Standards and conformity

The 76.1 x 5.0 mm cap is made to EN 10253 type B (DIN 2617) and produced from P265GH black steel.