Pipe cap for pipe 33.7 mm, wall thickness 4.0 mm, P265GH black steel, EN 10253 type B (DIN 2617)

Once installed, the pipe cap closes the end of a pipe pressure-tight and is butt welded to the pipe. It is supplied with pipe outside diameter 33.7 mm and wall thickness 4.0 mm. The article is made of P265GH black steel.

Benefits

• For pipe 33.7 mm outside diameter at a wall thickness of 4.0 mm.
• Domed shape to EN 10253 type B (DIN 2617), so the cap takes the internal pressure without extra stiffening.
• Material P265GH black steel, so the cap can be welded to a pipe of the same grade.
• The wall thickness of 4.0 mm matches that of the pipe, so the weld stays even.
• Supplied as a formed part, so the pipe end does not have to be closed with sheet metal.

Applications

Where an extension is planned for later, the branch is closed with the cap to EN 10253 type B (DIN 2617) and can be cut open again.

Standards and conformity

The 33.7 x 4.0 mm cap is made to EN 10253 type B (DIN 2617) and produced from P265GH black steel.