Reducing nipple, male thread M 22x1.5 to female thread G 1/2", length 26 mm, PN 315 bar

The reducing nipple connects two female threads through one continuous component made in a single piece. Zinc plated steel determines the load capacity and the corrosion behaviour. The joint is created via the male thread M 22x1.5 and the female thread G 1/2". The nominal pressure is stated as 315 bar.

Benefits

• 2 male threads on one piece save an additional fitting in the line.
• The hexagon in the middle transfers the tightening torque to both of the 2 threaded sides.
• Steel takes the tightening torque on the M 22x1.5 thread without permanent deformation.
• The nominal pressure of 315 bar defines the load limit of the joint.
• The male thread M 22x1.5 fits the existing port without an adapter.
• At 26 mm the overall length is defined in the data sheet and can be planned in advance.

Applications

Connection of sockets and valves, connection of devices, maintenance on pipe networks. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.