Reducing nipple, male thread G 1/4" to female thread NPT 1/4", length 20 mm, PN 16 bar, brass

The reducing nipple connects two female threads through one continuous component made in a single piece. Brass determines the load capacity and the corrosion behaviour. The joint is created via the male thread G 1/4" and the female thread NPT 1/4". The nominal pressure is stated as 16 bar.

Benefits

• 2 male threads on one piece save an additional fitting in the line.
• The hexagon in the middle transfers the tightening torque to both of the 2 threaded sides.
• Brass does not form any scale and stays free moving on the G 1/4" thread even after years.
• The nominal pressure of 16 bar defines the load limit of the joint.
• The male thread G 1/4" fits the existing port without an adapter.
• At 20 mm the overall length is defined in the data sheet and can be planned in advance.

Technical data

Applications

Connection of sockets and valves, connection of devices, maintenance on pipe networks. Brass is used in device engineering, in workshops and in water installation.