Quick connect coupling High Flow Cupla HFL-3P, stainless steel - Nitto Kohki 349829220

Lines that are parted and remade during operation cost time when they are screwed together. The Nitto Kohki High Flow Cupla joins hose and pipe lines by hand and is available in the HFL-2, HFL-3 and HFL-4 sizes.

• Connected and disconnected by hand, with no tools and without undoing a threaded joint
• Coupling body in brass or in stainless steel, matched to the surroundings and to the medium
• Seals in FKM or EPDM, so the material pairing suits the medium being carried
• HFL-2, HFL-3 and HFL-4 sizes cover different line cross sections within one series
• Socket and plug are available separately, so a damaged part can be replaced without renewing the whole connection

Technical data from the manufacturer catalogue

Dimensions

Dimensions in millimetres. Values in brackets apply in the connected condition.

Legend: L = overall length; H = width across flats or outside dimension; D = socket outside diameter; C = sleeve dimension; T = thread or barb size

Models in this series HI FLOW CUPLA / HI FLOW CUPLA BI Type

Every model of the series as printed in the manufacturer catalogue. The row of the article offered here is highlighted.

Operating principle

• Both socket and plug have built-in automatic shut-off valves.
• High flow rate type to increase cooling effect.
• Quick connection and disconnection of cooling pipes.
• Compact and space-saving design. Compared with the coupled length of SP CUPLA type A, that of HI FLOW CUPLA is reduced by 22%.
• Installation and maintenance can be done within a short time.
• BI Type: easy connection with stainless steel pipe.
• BI Type: connection to plastic hose is possible with optional hose connection kit.
• BI Type: connection to various tubes is also possible via the use of appropriate optional inserts.

Series comparison

Pick HI FLOW CUPLA when the cooling or temperature control line has to be closed on both sides, since every peer series in this group except COMPACT ZEROSPILL CUPLA is one-way shut-off. Against COMPACT ZEROSPILL CUPLA, which is also rated 1.0 MPa {10 kgf/cm2} and two-way shut-off, HI FLOW CUPLA is the high flow rate version with a coupled length 22% shorter than SP CUPLA type A. Where the line runs at 1.5 MPa {15 kgf/cm2}, HI CUPLA BL, LOCK CUPLA 200 or the other one-way shut-off series carry the higher pressure.

Body and seal materials

Applications

• Supply lines at assembly and test stations that are reconnected frequently
• Connection of tools and devices that are used in alternation
• Water carrying circuits with EPDM seals
• Damp areas and washdown zones, where the stainless steel version is used
• Test rigs and installations that are separated section by section for service or rebuild

Safety and application notes

• Before use, please be sure to read the Safety Guide described at the end of this book and the Instruction Sheet that comes with the products.

All technical data on this page is taken from the Nitto Kohki general catalogue Quick Connect Couplings C01en-b, page 159. The complete catalogue is available for download on this page.