PU suction and delivery hose, inside diameter 75 mm, light (DIN 26057-1), standard

This PU spiral hose conveys chips, dust, granulate and oil in suction and delivery service. The data sheet gives a working pressure range of -0.12 to 0.30 bar. This version is listed with inside diameter 75 mm, outside diameter 82 mm and wall thickness about 0.4 mm. The stated material is polyether polyurethane with an embedded steel spiral. This version is supplied with the light (DIN 26057-1) design and the standard version.

Benefits

• Inside diameter 75 mm at an outside diameter of 82 mm.
• Working pressure range -0.12 to 0.30 bar at a wall thickness of 0.4 mm.
• Minimum bending radius 45 mm, kink-proof thanks to the embedded steel spiral.
• Flame retardant to DIN 4102 B1 and permanently antistatic with a resistance below 1000 MOhm per metre.
• Temperature range -40 to +100 °C, briefly up to +125 °C.
• Roll length 15 m, cut lengths are possible.

Applications

On industrial vacuum units the hose of 75 mm inside diameter picks up chips, dust and oil mist.

Standards and conformity

The fire behaviour complies with DIN 4102 B1. The electrical resistance is below 1000 MOhm per metre.