PU suction and delivery hose, inside diameter 350 mm, light (DIN 26057-1), standard

Once installed, the PU spiral hose conveys chips, dust, granulate and oil in suction and delivery service. It is supplied with inside diameter 350 mm, outside diameter 358 mm and wall thickness about 0.4 mm. It is produced from polyether polyurethane with an embedded steel spiral. In addition the data give the light (DIN 26057-1) design and the standard version.

Benefits

• Inside diameter 350 mm at an outside diameter of 358 mm.
• Working pressure range -0.02 to 0.02 bar at a wall thickness of 0.4 mm.
• Minimum bending radius 210 mm, kink-proof thanks to the embedded steel spiral.
• Flame retardant to DIN 4102 B1 and permanently antistatic with a resistance below 1000 MOhm per metre.
• Temperature range -40 to +100 °C, briefly up to +125 °C.
• Roll length 10 m, cut lengths are possible.

Applications

On industrial vacuum units the hose of 350 mm inside diameter picks up chips, dust and oil mist.

Standards and conformity

The hose is flame retardant to DIN 4102 B1, permanently antistatic, halogen-free and free of plasticisers.