PU suction and delivery hose, inside diameter 30 mm, light (DIN 26057-1), standard

Made to DIN 4102 B1, this PU spiral hose conveys chips, dust, granulate and oil in suction and delivery service. This version is listed with inside diameter 30 mm, outside diameter 37 mm and wall thickness about 0.4 mm. Decisive for the selection is a working pressure range of -0.30 to 0.60 bar. The version is listed with the light (DIN 26057-1) design and the standard version.

Benefits

• Inside diameter 30 mm at an outside diameter of 37 mm.
• Working pressure range -0.30 to 0.60 bar at a wall thickness of 0.4 mm.
• Minimum bending radius 18 mm, kink-proof thanks to the embedded steel spiral.
• Flame retardant to DIN 4102 B1 and permanently antistatic with a resistance below 1000 MOhm per metre.
• Temperature range -40 to +100 °C, briefly up to +125 °C.
• Roll length 30 m, cut lengths are possible.

Applications

On industrial vacuum units the hose of 30 mm inside diameter picks up chips, dust and oil mist.

Standards and conformity

The hose is flame retardant to DIN 4102 B1, permanently antistatic, halogen-free and free of plasticisers.