PU suction and delivery hose, inside diameter 300 mm, light (DIN 26057-1), standard

This PU spiral hose conveys chips, dust, granulate and oil in suction and delivery service. This version comes with inside diameter 300 mm, outside diameter 308 mm and wall thickness about 0.4 mm. A further figure is a minimum bending radius of 180 mm. This version is supplied with the light (DIN 26057-1) design and the standard version.

Benefits

• Inside diameter 300 mm at an outside diameter of 308 mm.
• Working pressure range -0.03 to 0.03 bar at a wall thickness of 0.4 mm.
• Minimum bending radius 180 mm, kink-proof thanks to the embedded steel spiral.
• Flame retardant to DIN 4102 B1 and permanently antistatic with a resistance below 1000 MOhm per metre.
• Temperature range -40 to +100 °C, briefly up to +125 °C.
• Roll length 10 m, cut lengths are possible.

Applications

On industrial vacuum units the hose of 300 mm inside diameter picks up chips, dust and oil mist.

Standards and conformity

The fire behaviour complies with DIN 4102 B1. The electrical resistance is below 1000 MOhm per metre.