PU suction and delivery hose, inside diameter 125 mm, light (DIN 26057-1), standard

The PU spiral hose conveys chips, dust, granulate and oil in suction and delivery service and follows DIN 4102 B1. This version comes with inside diameter 125 mm, outside diameter 132 mm and wall thickness about 0.4 mm. It is complemented by a minimum bending radius of 75 mm. Also stated are the light (DIN 26057-1) design and the standard version.

Benefits

• Inside diameter 125 mm at an outside diameter of 132 mm.
• Working pressure range -0.07 to 0.18 bar at a wall thickness of 0.4 mm.
• Minimum bending radius 75 mm, kink-proof thanks to the embedded steel spiral.
• Flame retardant to DIN 4102 B1 and permanently antistatic with a resistance below 1000 MOhm per metre.
• Temperature range -40 to +100 °C, briefly up to +125 °C.
• Roll length 15 m, cut lengths are possible.

Applications

On industrial vacuum units the hose of 125 mm inside diameter picks up chips, dust and oil mist.

Standards and conformity

The fire behaviour complies with DIN 4102 B1. The electrical resistance is below 1000 MOhm per metre.