PU suction and delivery hose, inside diameter 120 mm, light (DIN 26057-1), standard

In use, the PU spiral hose conveys chips, dust, granulate and oil in suction and delivery service. This version is listed with inside diameter 120 mm, outside diameter 127 mm and wall thickness about 0.4 mm. Decisive for the selection is a working pressure range of -0.08 to 0.20 bar. In addition the data give the light (DIN 26057-1) design and the standard version.

Benefits

• Inside diameter 120 mm at an outside diameter of 127 mm.
• Working pressure range -0.08 to 0.20 bar at a wall thickness of 0.4 mm.
• Minimum bending radius 72 mm, kink-proof thanks to the embedded steel spiral.
• Flame retardant to DIN 4102 B1 and permanently antistatic with a resistance below 1000 MOhm per metre.
• Temperature range -40 to +100 °C, briefly up to +125 °C.
• Roll length 15 m, cut lengths are possible.

Technical data

Applications

On industrial vacuum units the hose of 120 mm inside diameter picks up chips, dust and oil mist.

Standards and conformity

The hose is flame retardant to DIN 4102 B1, permanently antistatic, halogen-free and free of plasticisers.