Professional cleaning gun, bright brass, EPDM seal DVGW, G 1/2 IT - Riegler 156066

Professional cleaning gun, bright brass with EPDM seal accord. to DVGW, operating temperature max. 50 °C, PN max. 24 bar, G 1/2 IT Ideal for cleaning in industry and manual trades. The thick rubber coating provides thermal insulation for the hot or cold water flowing inside as well as impact protection. The flow rate is controllable with the adjustment screw (using a coin). The steel shackle allows the lever to be latched for extended use. Also suitable for drinking water.

Standards and origin

• Customs tariff number: 84242000
• Country of origin: CN

About Professional industrial spray gun

The professional cleaning gun is a hand-held shut-off and control valve for water outlets. It connects through a G 1/2 female thread, is rated for up to 24 bar operating pressure and delivers about 25 l/min at 5 bar. The jet pattern is set at the adjusting screw, which can be turned with a coin.

What matters when choosing

• Connection thread: the gun comes with G 1/2 female thread. Check whether the existing hose tail, coupling or wall fitting matches, or whether an adapter is needed.
• Operating pressure: 24 bar is the permitted maximum. What counts is the static line pressure plus the peaks that occur when the gun is closed quickly.
• Flow rate: 25 l/min at 5 bar indicates how much water the supply line has to provide so the jet does not collapse when larger surfaces are washed down.
• Temperature range: the gun is intended for 1 °C to 50 °C. Hotter water or outdoor points exposed to frost are outside the rated range.
• Materials: the body is CW617N brass, the sleeve is EPDM. The rubber sleeve protects the gun against damage and the operator's hand against heat and cold transferred by the water passing through.

Typical applications

• Washing down machines, workbenches and floor areas in industrial and commercial workshops.
• Cleaning vehicles, trailers and transport containers at the washing bay.
• Rinsing out tubs, containers and drains, where a soft or a hard jet is needed depending on the soiling.
• Water draw-off points in the yard, for example to clean equipment at the end of a shift.

The seal is EPDM to DVGW, the body is CW617N brass. Country of origin is CN.