Compressed air and water hose NR / SBR, black - Riegler K236
Compressed air and water hose NR / SBR, black. This range covers 3 variants from 3.56 EUR. Select the version you need above.
Available variants
| For hose ID [mm] | 6, 9, 13 |
|---|
Shared technical data
| Outer cover | NR / EPDM, schwarz |
|---|---|
| Max. operating pressure | 20 bar |
| Reinforcement | Gewebeeinlagen |
| Colour | schwarz |
| Reel length | 50 m |
| Inner tube | NR / SBR, schwarz |
| Max. temperature range | 60 °C |
| Min. temperature range | -20 °C |
| Country of origin | MY |
| Customs tariff number | 40093100 |
About Compressed air hoses
Compressed air hoses carry air and water from the distribution point to the tool or outlet. The range is released for operating pressures up to 20 bar and is supplied on 50 m reels for cutting to length on site. The NR/SBR construction stays flexible enough for hoses that are moved during work.
What matters when choosing
- Hose inside diameter 6, 9 or 13 mm sets the possible flow rate and has to match the hose tails and clamps already in use.
- Max. operating pressure 20 bar applies to the whole range. Where the load pulsates heavily, keep the system pressure well below that figure.
- Temperature range -20 °C to 60 °C: judge it by the surroundings as well as the medium, for example outdoor routing in winter.
- Outside diameter and minimum bending radius decide whether the hose fits through existing routes and around tight corners.
- Reel length 50 m: the range is sold as bulk hose, which keeps offcuts low when several outlets are fitted at once.
Typical applications
- Connecting air tools to service units and wall outlets in the workshop
- Air distribution to manual workstations and assembly lines
- Water supply at cleaning and wash-down points
- Site and outdoor work, where abrasion and weather resistance matter
- Making up custom hose assemblies from bulk stock in the maintenance store
The hose is made of NR/SBR, with a cover that resists abrasion, weathering and temporary contact with oil. Country of origin is Malaysia (MY).
| Manufacturer | Riegler |
|---|---|
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |



