Press fitting tee, female thread Rp 1/2", pipe 15 mm, stainless steel 1.4404

The press fitting tee brings the female thread Rp 1/2" and a pipe of 15 mm outside diameter together. The material is stainless steel 1.4404, the size is fixed at pipe diameter 15 mm. The tee design sets a branch at right angles onto the main line.

Benefits

• One part serves two outlets and saves additional joints
• The installation dimensions a of 47 mm and z of 23 mm are stated
• The press joint is made in a single operation without an open flame
• The size 15 is clearly assigned and stays available for reordering
• The connection over female thread Rp 1/2" is fixed in size and needs no adaptor
• With pipe diameter 15 mm the size is fixed, so no reworking of the line is required

Technical data

Applications

Cooling and heating water lines, thermal solar systems with glycol mixture, refurbishment of existing pipe networks, compressed air networks in workshop and hall.

Standards and conformity

Pressing is done with jaws of the SA, M and V press profiles.