Steel crimp fitting for hydraulic hoses, 60° BSP sealing head, 90° elbow, G 3/4", DN 19

This fitting connects a hose with DN 19 as a 60° BSP sealing head with union nut and G thread, from DN 31 additionally with an O-ring. It carries the connection size G 3/4" and is crimped directly onto the hose end. The material is steel. The outlet is a 90° elbow.

Benefits

• connection type 60° BSP sealing head with union nut and G thread, from DN 31 additionally with an O-ring
• connection size G 3/4" at nominal size DN 19
• 90° elbow outlet, so the line can be routed without a forced bend
• steel as the material, matching the high pressure hydraulics of this nominal size
• crimped tight onto the hose end together with the ferrule
• suitable for hose types 1 SN, 2 SN, 2 SC, 4 SP, 1 TE, 2 TE, 3 TE, 1 TF and 1 KU of this series

Applications

It is used in maintenance when a damaged line is replaced by one of the same nominal size.

Standards and conformity

The data sheet states the connection type as 60° BSP sealing head with union nut and G thread, from DN 31 additionally with an O-ring.