Polyurethane hose, inside calibrated, 4.3 x 3 mm, blue, cut length from a 50 m roll

Once installed, the polyurethane hose carries compressed air in pneumatic systems and stays resistant to kinking. The data also state a smallest bending radius of 15 mm. Decisive for the selection is a working pressure of 12 bar.

Benefits

• Diameter 4.3 x 3 mm outside by inside at a working pressure of 12 bar.
• Smallest bending radius 15 mm for tight routing.
• Material polyester polyurethane with a Shore hardness of 52 D.
• Temperature range -35 to +60 °C, the usable pressure is 100 per cent at +20 °C and 50 per cent at +60 °C.
• The hose resists kinking and abrasion and withstands aliphatic hydrocarbons.

Applications

In pneumatics the 4.3 x 3 mm hose connects valves and cylinders up to 12 bar.