Pneumatic hand drill ADR-65 - Nitto Kohki 160700030

In assembly and rework, holes are often drilled overhead or in tight positions where a heavy tool tires the operator quickly. These pneumatic hand drills weigh 0.8 to 1.1 kg and drill up to 10 mm diameter.

• Weight of 0.8 to 1.1 kg, which keeps long drilling sequences and overhead work manageable
• Drilling capacity up to 10 mm diameter, one tool covers assembly and repair holes
• Free speed of 2,000 to 2,900 rpm depending on model, so small and larger bits run in a suitable range
• Rated air pressure of 0.59 MPa at 0.55 to 0.67 m3/min consumption, so compressor and hose sizing is known in advance
• Drill chuck and chuck key are included, the tool is ready to use without extra purchases
• A hanger for the bottom of the grip is available as an accessory for use on a spring balancer

Technical data

Applications

• Assembly holes on subassemblies and plant equipment
• Rework and repair drilling on site
• Workstations with a permanent compressed air supply
• Repeat drilling on a spring balancer in production
• Work in confined positions and overhead

Standard accessories

• Drill Chuck: 1 pc. on the body
• Chuck Handle: 1 pc.
• Bushing PT1/4 x NPT1/4: 1 pc.
• 3OSH: 1 pc.
• Optional Accessory
• Hanger: 1 pc.
• A hanger to be mounted at the bottom of the grip is available as option.

Operating principle

An air motor drives the drill chuck through the gearing. Speed is controlled with the operating lever, and the rated air pressure determines speed and torque.