Ball valve with actuator, nickel-plated brass, G 1-1/2", DN 40, double acting, FKM seal

In use, the ball valve shuts the line with a quarter turn of the ball, driven by the pneumatic rack-and-pinion actuator. The data also state a medium temperature of -20 to +160 °C. This version comes with thread G 1-1/2", nominal size DN 40 mm, face-to-face length 120 mm and switching function double acting, FKM seal.

Benefits

• The valve is DVGW certified for gas and keeps the DIN 3202-M3 face-to-face length at DN 40 mm.
• The pressure range of -0.9 to 40 bar includes vacuum duty.
• The double acting, FKM seal version sets the rest position without pilot air.
• The medium temperature of -20 to +160 °C applies to the ball valve itself.
• A nickel-plated brass body with a hard chrome ball and a PTFE seat at a face-to-face length of 120 mm.
• Produced to EN 331.

Applications

In compressed air and water circuits the range of -0.9 to 40 bar covers both pressure and vacuum.

Standards and conformity

Built to EN 331, with a face-to-face length of 120 mm to DIN 3202-M3.