Ball valve, 3-piece, with pneumatic actuator, G 2-1/2", DN 65, double acting

As a ball valve the article shuts the line with a quarter turn of the ball, driven by the pneumatic rack-and-pinion actuator. Material 1.4408 is listed for this version. The data state a pressure range of -0.9 to 63 bar.

Benefits

• The three-piece body allows the ball insert to be removed without undoing the ports of 65 mm nominal size.
• The pressure range of -0.9 to 63 bar also covers vacuum duty.
• The double acting version determines the position the valve takes without pilot air.
• The face-to-face length of 185 mm follows DIN 3202-M3.
• Body and ball in 1.4408 with a PTFE seat also carry aggressive media at 65 mm nominal size.

Applications

In filling and dosing plants the double acting version switches the line into the required rest position.

Standards and conformity

The face-to-face length of 185 mm complies with DIN 3202-M3.