Ball valve, 3-piece, with pneumatic actuator, G 1", DN 25, spring closing

This ball valve to DIN 3202-M3 shuts the line with a quarter turn of the ball, driven by the pneumatic rack-and-pinion actuator. This version comes with thread G 1", nominal size DN 25 mm, face-to-face length 90 mm and switching function spring closing. A further figure is a nominal size of DN 25 mm.

Benefits

• The three-piece body allows the ball insert to be removed without undoing the ports of 25 mm nominal size.
• The pressure range of -0.9 to 63 bar also covers vacuum duty.
• The spring closing version determines the position the valve takes without pilot air.
• The face-to-face length of 90 mm follows DIN 3202-M3.
• Body and ball in 1.4408 with a PTFE seat also carry aggressive media at 25 mm nominal size.

Applications

In process lines the G 1" valve shuts off a nominal size of DN 25 mm by remote control.

Standards and conformity

The face-to-face length of 90 mm complies with DIN 3202-M3.