Ball valve, 3-piece, with pneumatic actuator, G 1/2", DN 15, spring opening, FKM seal

The ball valve shuts the line with a quarter turn of the ball, driven by the pneumatic rack-and-pinion actuator and follows DIN 3202-M3. This version comes with thread G 1/2", nominal size DN 15 mm, face-to-face length 75 mm and switching function spring opening, FKM seal. It is complemented by a nominal size of DN 15 mm.

Benefits

• The three-piece body allows the ball insert to be removed without undoing the ports of 15 mm nominal size.
• The pressure range of -0.9 to 63 bar also covers vacuum duty.
• The spring opening, FKM seal version determines the position the valve takes without pilot air.
• The face-to-face length of 75 mm follows DIN 3202-M3.
• Body and ball in 1.4408 with a PTFE seat also carry aggressive media at 15 mm nominal size.

Applications

In process lines the G 1/2" valve shuts off a nominal size of DN 15 mm by remote control.

Standards and conformity

The face-to-face length of 75 mm complies with DIN 3202-M3.