Ball valve, 3-piece, with pneumatic actuator, G 1/2", DN 15, double acting, FKM seal

This ball valve to DIN 3202-M3 shuts the line with a quarter turn of the ball, driven by the pneumatic rack-and-pinion actuator. This version comes with thread G 1/2", nominal size DN 15 mm, face-to-face length 75 mm and switching function double acting, FKM seal. A further figure is a nominal size of DN 15 mm.

Benefits

• The three-piece body allows the ball insert to be removed without undoing the ports of 15 mm nominal size.
• The pressure range of -0.9 to 63 bar also covers vacuum duty.
• The double acting, FKM seal version determines the position the valve takes without pilot air.
• The face-to-face length of 75 mm follows DIN 3202-M3.
• Body and ball in 1.4408 with a PTFE seat also carry aggressive media at 15 mm nominal size.

Applications

On vacuum and compressed air runs the range of -0.9 to 63 bar covers both duties with a single device.

Standards and conformity

The face-to-face length of 75 mm complies with DIN 3202-M3.