Images are examples, some edited with AI. The technical data are authoritative. AI notice
NAMUR solenoid valve 5/2-way, double solenoid (bistable), G 1/4, 1000 l/min, 24 V DC - YPC SN3200
Bistable 5/2-way valve for direct mounting on NAMUR rotary actuators, controlled with 24 V DC. The process valve keeps its position during a power failure, flow rate 1000 l/min.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Two 24 V DC coils control this bistable 5/2-way valve, which sits directly on the NAMUR flange of the actuator without any piping. The last position switched is held even if the power fails.
Advantages
- NAMUR interface for direct mounting, G 1/4 with 2x G 1/4 exhaust
- Flow rate 1000 l/min, effective area 18.0 mm²
- Response time max. 25 ms at 5 bar, switching frequency up to 5 Hz
- Aluminium body and spool, NBR seals, glass fibre reinforced polyamide pilot
- No lubrication required, CE, UL and RoHS according to YPC
Applications
- Open/close control of double-acting rotary actuators where the process valve must hold position on power failure
- Control from PLC pulse outputs, the coils are not energised continuously
- Diverter flaps and switch points in conveying and process lines
Accessories and spare parts
A replacement solenoid coil for 24 V DC is available separately, as is a replacement seal kit for the NAMUR flange.
Standards and conformity
NAMUR interface. CE, UL and RoHS according to the YPC catalogue.
Technical data
| Type | NAMUR solenoid valve, internally piloted |
|---|---|
| Function | 5/2-way, double solenoid (bistable) |
| Reset | none, two solenoids |
| Port | G 1/4 |
| Exhaust | 2x G 1/4 |
| Flow rate at 5 bar | 1000 l/min |
| Effective area | 18.0 mm² |
| Operating pressure | 1.5 to 10 bar |
| Medium | Compressed air and inert gases, filtered, lubricated or non-lubricated |
| Ambient and media temperature | 5 to 60 °C |
| Response time at 5 bar | max. 25 ms |
| Max. switching frequency | 5 Hz |
| Manual override | non-locking push button |
| Control voltage | 24 V DC |
| Voltage tolerance | ±10 % |
| Power consumption per coil | 2.1 W |
| Electrical connection | 3-pin plug connector, included |
| Protection class | IP65 |
| Insulation class | F |
| Materials | Aluminium body and spool, NBR seals, glass fibre reinforced polyamide pilot |
| Body width | 23 mm |
| Weight | 390 g |
| Dimension drawing | in the YPC datasheet |
| Manufacturer | YPC |
| Hersteller-Nr | SN3200 IPSC-D4 |
| EAN | 4050571632717 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Thread | G 1/4 |
| Housing material | Aluminium |
| Flow rate [l/min] | 1000 |
| Gewinde Abluft (2x) | G 1/4" |
| Leistungsaufnahme (DC) [W] | 2,1 |
| Dichtungen | NBR |
| Norm | NAMUR |
| Operating voltage | 24 V DC |
| Betriebsdruck max [bar] | 10 |
| Protection rating | IP65 |
| Temperaturbereich | 5-60 °C |
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.








