NAMUR solenoid valve 5/2-way, double solenoid (bistable), G 1/4, 1000 l/min, 24 V AC - YPC SN3200

As a double solenoid valve, this NAMUR unit has one solenoid for each switching position. A 24 V AC pulse drives the rotary actuator open or closed, after which the voltage may drop without the process valve changing position.

Advantages

• Response time max. 25 ms at 5 bar, switching frequency up to 5 Hz
• Aluminium body and spool, NBR seals, glass fibre reinforced polyamide pilot
• No lubrication required, CE, UL and RoHS according to YPC
• NAMUR interface for direct mounting, G 1/4 with 2x G 1/4 exhaust
• Flow rate 1000 l/min, effective area 18.0 mm²

Applications

• Open/close control of double-acting rotary actuators where the process valve must hold position on power failure
• Control from PLC pulse outputs, the coils are not energised continuously
• Diverter flaps and switch points in conveying and process lines

Accessories and spare parts

A replacement solenoid coil for 24 V AC is available separately, as is a replacement seal kit for the NAMUR flange.

Standards and conformity

NAMUR interface. CE, UL and RoHS according to the YPC catalogue.