Socket, thread G 1/2", length 30 mm, PN 40 bar, stainless steel 1.4571, width across flats 27 mm

For the straight run between two threads the socket is the shortest component in the line. The connection is made via the thread G 1/2". The overall length is 30 mm. The component is made of stainless steel 1.4571.

Benefits

• The width across flats of 27 mm takes a standard wrench.
• Both sides carry a thread, so 1 component replaces two separate transition pieces.
• The bore runs through and does not narrow the cross section at either of the 2 connection sides.
• Stainless steel 1.4571 withstands moisture and cleaning agents and keeps the sealing face dimensionally stable on the G 1/2" thread.
• The nominal pressure of 40 bar defines the load limit of the joint.

Applications

Pipework construction, extension of existing runs, connection of valves. The stainless material suits plants with moisture, cleaning agents and changing media.