Pressure switch, G 1/8", 0.3 - 2 bar, brass, overpressure safety 5 bar, protection IP 65, Schließer

The pressure switch converts the applied pressure into an electrical signal for control or signalling. The material used is brass. The setting range covers 0.3 - 2 bar. The connection is made via thread G 1/8". The overpressure safety amounts to 5 bar.

Benefits

• Overpressure safety 5 bar, so the load limit is clearly stated
• Temperature range -25 to +85 °C for use in the workshop and in the plant
• Degree of protection IP 65 against dust and moisture at the installation point
• Switching capacity 42 V / 100 VA at the output contact
• Setting range 0.3 - 2 bar as the leading rating of the device
• Connection thread G 1/8" for direct installation in the line

Applications

Compressor controls, pump monitoring, hydraulic power units and limit signalling in machines.