Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 2/2-way single solenoid, closed 9 mm width MHJ9-MF/LP - Festo 8084233
Solenoid valve MHJ9-MF/LP as a 2/2-way valve (single solenoid, closed) with 100 l/min standard nominal flow rate for controlling pneumatic actuators. Designed for 0.5 to 4 bar operating pressure, sub-base mounting and 9 mm width.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The solenoid valve MHJ9-MF/LP works as a 2/2-way valve (single solenoid, closed) and reaches 100 l/min standard nominal flow rate at 0.5 to 4 bar operating pressure. Designed with sub-base mounting, 9 mm width and 24 V DC operating voltage.
Benefits
- Flow: 100 l/min standard nominal flow rate at only 9 mm width
- Pressure range: 0.5 to 4 bar
- Switching frequency: up to 1000 Hz
- Rugged: IP40 protection, corrosion resistance class 2
- Temperature: -5 to 60 °C ambient
- Continuous duty: 100 % duty cycle
Applications
A switching frequency of up to 1000 Hz suits fast cycling tasks such as blow-off or sorting. Mounting: on sub-base, grid dimension 9.5 mm. Operating medium for the MHJ9-MF/LP: compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation possible.
Technical data
| Type | MHJ9-MF/LP |
|---|---|
| Festo part number | 8084233 |
| Valve function | 2/2-way, single solenoid, closed |
| Type of actuation | electrical |
| Width | 9 mm |
| Standard nominal flow rate | 100 l/min |
| pneumatic working port | sub-base |
| Operating voltage | 24 V DC |
| Operating pressure | 0.5 to 4 bar |
| Design | poppet valve without spring return |
| Reset method | pneumatic spring |
| Degree of protection | IP40 |
| Grid dimension | 9.5 mm |
| Operating note | do not operate without flow., for block mounting with flow, max. ambient temperature 45°C. |
| Sealing principle | hard |
| Mounting position | any |
| Manual override | none |
| Type of piloting | direct |
| Flow direction | non-reversible |
| b value | 0.38 |
| C value | 0.4 l/sbar |
| Max. switching frequency | 1000 Hz |
| Switching time on at 0.4 MPa (4 bar, 58 psi) and 24 V when new | 0.8 ms |
| Switching time off at 0.4 MPa (4 bar, 58 psi) and 24 V when new | 0.5 ms |
| Switching time on at 0.4 MPa (4 bar, 58 psi) and 48 V when new | 0.6 ms |
| Switching time off at 0.4 MPa (4 bar, 58 psi) and 48 V when new | 0.4 ms |
| Switching time on at 0.4 MPa (4 bar, 58 psi) and 12 V when new | 1.1 ms |
| Switching time off at 0.4 MPa (4 bar, 58 psi) and 12 V when new | 0.4 ms |
| Switching time on at 0.05 MPa (0.5 bar, 7.25 psi) and 24 V when new | 0.7 ms |
| Switching time off at 0.05 MPa (0.5 bar, 7.25 psi) and 24 V when new | 0.5 ms |
| Tolerance switching time off | +15 %/-25 % |
| Tolerance switching time on | ± 15 % |
| Operational voltage range DC | 12 to 53 V |
| Duty cycle | 100% |
| Note regarding operating voltage | operation only with connecting cable MHJ9-KMH-... |
| Coil resistance R20 | 2.5 Ohm |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible |
| Restrictions for environmental and media temperature | as a function of switching frequency (see graph) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Storage temperature | -20 to 50 °C |
| Permissible solenoid surface temperature | 120 °C |
| Media temperature | -5 to 60 °C |
| Ambient temperature | -5 to 60 °C |
| Max. tightening torque for valve mounting | 0.28 Nm |
| Product weight | 25 g |
| Electrical connection | 2-pin, plug KMH |
| Type of mounting | on sub-base |
| Pneumatic connection, port 1 | sub-base |
| Pneumatic connection, port 2 | sub-base |
| Note on materials | RoHS compliant |
| Material seals | HNBR |
| Material housing | reinforced PA |
| Material screws | steel |
| Manufacturer | Festo |
| Hersteller-Nr | MHJ9-MF/LP |
| EAN | 4052568449797 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Seal material | HNBR |
| Medium | Compressed air |
| Function | 2/2 closed monostable |
| Flow rate [l/min] | 100 |
| Actuation type | Electrical |
| Series | MHJ9 |
| Betriebsdruck max [bar] | 4 |
| Protection rating | IP40 |
| Temperaturbereich | -5-60 °C |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







