Brass angle ball valve, DVGW, R 1" / Rp 1", -0.9 to 40 bar, seals PTFE / NBR

When used as a brass angle ball valve, the article shuts off the flow in the line with a quarter turn. The article is listed with G (male thread) R 1" and G (female thread) Rp 1". The material is nickel-plated brass. The seals are made of PTFE / NBR.

Benefits

• full bore in the open position and therefore low pressure loss, verified by G (male thread) R 1"
• pressure rating PN -0.9 to 40 bar
• material nickel-plated brass as stated in the data
• sealing material PTFE / NBR
• made to DVGW
• G (female thread) Rp 1"

Applications

The article is called for in pipework, compressed air networks and plant construction. The listed media are flüssige and gasförmige, neutrale Medien, gases nach DVGW Arbeitsblatt, vacuum.

Standards and conformity

The stated standard is DVGW.